Clippers
Oster Oster Golden A5 Clipper - Single Speed - Blade Included: Without Blade
Oster Golden A5 is a very sturdy single-speed clipper manufactured in the USA. Fully professional, recommended for veterinarians, groomers, and breeders. It operates smoothly and without vibrations, allowing for continuous use. It features easy-to-clean air filters. A special latch stabilizes the blades, preventing them from wobbling during operation. An advantage is the good availability of parts and a rich selection of snap-on blades ranging from 1/20 mm to 19 mm. The warranty is 12 months. The clipper has a simple and easy-to-use one-button blade replacement system. The set includes: Oster Golden A5 single-speed clipper - with a long 4 m soft and round cable, a tube of oil for blade maintenance, a tube of grease for lubricating gears, a set of replacement carbon brushes for the motor, a cleaning brush, instructions in Polish, and a warranty card. The Oster Golden A5 is compatible with Snap-On blades from brands such as Andis, Oster, Moser, Geib, Aesculap, and Wahl. The clipper is sold factory-direct by the manufacturer without a blade. There is an option to purchase it with an Oster Cryogen-X #10 blade cutting at 1.6mm or with an Oster Cryogen-X surgical #50 blade cutting at 0.2mm.
€201,58
Andis Replacement battery for Andis Pulse ZR II clipper
Replacement battery for Andis Pulse ZR II clipper.
€163,78
Heiniger Charger power supply for Heinger Saphir clippers
Are you looking for spare/service parts for the Heiniger Saphir clipper? Make your selection based on the service diagram of the clipper. GroomerShop.pl is an authorized warranty and post-warranty service for Heiniger clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown on the diagram, please contact us, and we will verify the possibility of ordering it. Product Code | Name 1 | SRV-HG-707-831 | Housing for Heiniger Saphir clipper 2 | HG-707-771 | Battery for Heiniger Saphir clipper 3 | HG-707-800-21 | Motor for Heiniger Saphir clippers 4 | HG-707-833 | PCB Electronics for Heiniger Saphir clippers 5 | HG-707-855 | Rubber gasket for Heiniger Saphir clipper 6 | HG-707-847 | Rocker for Heiniger Saphir clippers 7 | HG-707-848 | Rocker gasket for Heiniger Saphir clipper 8 | SRV-HG-707-856 | Seeger ring Ø 3.2 for Heiniger Saphir clipper 9 | SRV-HG-707-886 | Washer Ø 4x0.5 for Heiniger Saphir clipper 10 | HG-707-800-20 | Gear with ball bearing for Heiniger Saphir clipper 11 | HG-707-557 | Large housing screw (KA 3x16) for Heiniger Saphir clipper 12 | HG-707-854 | Blade hinge for Heiniger Saphir clipper 13 | HG-707-800-25/A | Blade latch for Heiniger Saphir clippers 14 | SRV-HG-707-846 | Small housing screw (KA 30x8) for Heiniger Saphir clipper 15 | SRV-HG-707-891 | Blade pressure spring for Heiniger Saphir clipper 16 | SRV-HG-707-892 | Blade guide for Heiniger Saphir clipper 17 | SRV-HG-707-890 | Blade hook for Heiniger Saphir clipper 18 | SRV-HG-707-893 | Mounting screw 3.5x4mm for Heiniger Saphir clipper 19 | SRV-HG-707-827 | Charger PCB electronics for Heiniger Saphir clipper 20 | SRV-HG-707-668.EU | Charger power supply for Heiniger Saphir clipper 21 | SRV-HG-707-822 | Charging station for Heiniger Saphir clipper 22 | HG-707-720 | Power supply for Heiniger Saphir clippers
€23,94
Wahl Wahl Avalon - professional, powerful horse clipping machine
Wahl Avalon Horse Clipper from the Wahl HorseLine series. Wahl Avalon is the successor to the Moser Avalon clipper, which is no longer in production. These companies merged, resulting in the Wahl Professional Avalon clipper. The clipper is equipped with a single-speed motor drive with a powerful 80W output. The battery pack worn on the belt is connected to the clipper via a flexible spiral cable. A single battery charge allows for 2.5 to 3 hours of continuous operation. The set includes a professional wide 62 mm cutting blade with a length of 2.3 mm. The clipper operates quietly and without vibrations. Thanks to the air filter for cooling the motor, there is no need to clean the interior of the clipper. The ergonomic design ensures excellent comfort during clipping and does not strain the hand. It features a Snap-On system for easy blade replacement. The clipper is compatible with blades from the following manufacturers: Oster® A5™, Andis® AG™, WAHL®, Laube®, THRIVE®, Geib® animals clippers. Standard equipment includes: Clipper with spiral cable, Clipper holster with belt, Battery with clip for attaching to the belt, Moser blade 2.3 mm, Oil bottle, Cleaning brush, Plastic case, User manual + warranty card.
€327,58
Joyzze Joyzze Falcon Corded Clipper - ultra-lightweight and quiet corded clipper with a running blade, black
Joyzze Falcon is the lightest corded clipper available on the market! It is quiet, lightweight, and ergonomic. Equipped with a powerful brushless motor, it offers up to 10,000 hours of lifespan. With two speed settings, it can handle both fine and thick pet fur. The slim shape of the housing is designed to fit the anatomy of the hand, enhancing user comfort. The Falcon model is perfect for groomers looking for additional equipment in their salon, as an alternative to heavy clippers. It is also an excellent choice for breeders with multiple dogs, as well as veterinarians. It comes with a long cord and power supply. Sold as a set with a #10 blade (1.5mm). The Falcon clipper is available in three color versions. *All Snap-On type blades, such as Oster, Andis, Moser, Wahl, Heiniger, etc., are compatible with the Joyzze Falcon clipper. Technical specifications: power: 30W, number of speeds: 2, noise level:
€251,98
Moser Blade hinge for Moser 1245 clippers, Wahl KM2, KM Cordless
Original blade hinge designed for Moser 1245, Wahl KM2, KM Cordless clippers. The set includes: blade hinge, blade latch, and a set of 2 mounting screws - Torx M3x6. GroomerShop.pl is an authorized warranty and post-warranty service for pet clippers. All offered parts are original service parts from the manufacturer. If you need a part that is currently not available in our store, please contact us, and we will verify the possibility of ordering it.
€11,32
Heiniger Complete motor for Heiniger Style clippers
Looking for spare/service parts for the Heiniger Style Mini clipper? Make your selection based on the service diagram of the clipper. GroomerShop.pl is an authorized warranty and post-warranty service for Heiniger clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown on the diagram, please contact us, and we will verify the possibility of ordering it. Product Code | Name 1 | SRV-HG-707-240 | Switch button for Heiniger Style Mini clipper 2 | SRV-HG-707-241 | Upper housing for Heiniger Style Mini clipper 3 | SRV-HG-707-242 | Switch for Heiniger Style Mini clipper 4 | SRV-HG-707-243 | PCB electronics for Heiniger Style Mini clipper 5 | SRV-HG-707-244 | Complete motor for Heiniger Style Mini clipper 6 | SRV-HG-707-245 | Plastic cap for Heiniger Style Mini clipper 7 | HG-707-265 | Blade for Heiniger Style Mini clipper 8 | SRV-HG-707-246 | Lower housing for Heiniger Style Mini clipper 9 | SRV-HG-707-247 | Parts set for Heiniger Style Mini clipper 10 | SRV-HG-707-254.EU | Charger for Heiniger Style Mini clipper
€30,24
Aesculap Kiwak for Aesculap Favorita II Clipper (GT104)
Replaceable rocking arm for Aesculap Favorita II clipper (GT104). GroomerShop.pl is an authorized warranty and post-warranty service for Aesculap clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that is currently not available in our store, please contact us, and we will verify the possibility of ordering it.
€12,60
Tritra Tritra K35T - cordless finishing clipper with blade - Purple
Quiet and professional finishing clipper from the Tritra brand, designed for finishing work. The elegant and ergonomic casing ensures high comfort during use. The built-in lithium-ion battery (without memory effect) allows for up to 60 minutes of clipping! The LED indicator informs us about the battery charge level. The included power adapter allows for continuous operation without the need to recharge the battery during clipping. This trimmer is perfect for partial trimming and contouring of the head, ears, legs, belly, and tail. Included in the set: Tritra K35T finishing clipper with a stainless steel blade with a cutting height of 0.6 mm, two plastic attachments of 3 mm and 4 mm as well as 5 mm and 6 mm, power adapter (EU/PL plug), brush, oil, warranty card. Technical specifications: number of speeds: one, working time after full charge: approx. 60 minutes, weight: 112 g, battery type: Li-Ion (without memory effect).
€60,48
Wahl Complete housing for Wahl SuperTrim clippers
Are you looking for spare/service parts for the Wahl Super Trim clipper? Make your selection based on the service diagram of the clipper. Tip: Available parts are visible after expanding the list above the Add to Cart button. GroomerShop.pl is an authorized warranty and post-warranty service for Wahl clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown on the diagram, please contact us, and we will verify the possibility of ordering it. Product Code | Name 2010 SRV-M-1854-7832 | Blade housing with guide for Wahl Super Trim clipper 2020 SRV-M-1854-7853 | Blade adjustment lever for Wahl Super Trim clipper 2040 SRV-W-1592-7120 | Housing for Wahl Super Trim clipper 2050 SRV-W-1590-7021 | Motor for Wahl Super Trim clipper 2060 SRV-M-1590-7491 | Electronics for Wahl Super Trim clipper 2070 SRV-W-1590-7292 | Battery for Wahl Super Trim clipper 2080 SRV-W-1591-7540 | Charging station for Wahl Super Trim clipper 2090 SRV-W-1881-7120 | Power supply with cable for Wahl Super Trim clipper
€15,12
Moser Complete housing for Moser Prima clipper
Looking for spare/service parts for the Moser Prima clipper? Make your selection based on the service diagram of the clipper. GroomerShop.pl is an authorized warranty and post-warranty service for Moser clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown on the diagram, please contact us, and we will verify the possibility of ordering it. Product Code Name 0020 SRV-M-1586-7050 Complete housing for Moser Prima clipper 0030 SRV-M-1586-7010 Blade holder for Moser Prima clipper 0040 SRV-M-1586-7020 Motor for Moser Prima clipper 0050 SRV-M-1586-7031 PCB for Moser Prima clipper 0060 SRV-W-1590-7292 1.2V NiMH battery for Moser Prima clipper 0070 SRV-M-1586-7040 Battery base for Moser Prima clipper 0080 SRV-M-1881-7110 Power socket for Moser Prima clipper 0090 SRV-W-1881-7120 Power supply with cable for Moser Prima clipper
€22,68
Show Tech Show Tech Starlet Trimmer - cordless finishing trimmer
Starlet Finishing Clipper is designed for precise trimming of delicate and hard-to-reach areas, as well as details such as paws, muzzle, ears, and tail. With its lightweight and ergonomic design, this clipper fits comfortably in your hand. It can operate both corded and cordless. The built-in lithium-ion battery provides up to 90 minutes of use on a full charge. The LED indicator displays 3 different speeds and the battery level. The blade used in this model cuts at a length of 0.5mm and features very fine and closely spaced teeth, ensuring safe usage and guaranteeing a super smooth finish. Technical specifications of Show Tech Starlet Trimmer: Adapter: AC input 100-240V 50/60Hz, DC output 3.5V 1000mAh Battery: 3.2V 600mAh Battery type: Lithium LiFePo4 Operating mode: Corded/Cordless Blade: Stainless steel Cutting length: 0.5mm Blade width: 3.2cm
€70,56
Andis Drive cover for Andis Endurance BDC clipper
Original drive cover for Andis Endurance BDC clippers. GroomerShop.pl is an authorized warranty and post-warranty service for Andis clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that is currently not available in our store, please contact us, and we will verify the possibility of ordering it.
€2,52
Heiniger Replacement battery for Heiniger Cordless clipper 3000mAh
Replaceable battery for Heiniger Cordless clipper 3000mAh. Technical specifications: battery type: NiMH charging voltage: 7.2 V battery capacity: 3000mAh operating time on battery: 60 minutes charging time: 60 minutes
€108,34
Andis Andis AGCB Super Brushless + CeramicEdge Promotional Set - Quiet, Professional Clipper with Ceramic Blades - Burgundy
Andis AGCB Super Brushless Promotional Set with additional CeramicEdge blade No. 7FC - 3.2 mm. A professional, two-speed corded clipper for grooming animals. It is one of the quietest corded clippers available on the market. Equipped with a next-generation brushless motor, it is several times more durable and over 30% lighter than the previous Andis AGC 2 Super model. The 36W brushless motor features high power and torque, making it excellent for even the thickest and most matted fur. It guarantees efficiency and a very long lifespan. The Andis AGCB Super Brushless is suitable for grooming all breeds of dogs, cats, and finishing work on horses. A rich selection of blades makes it a powerful ally for groomers, veterinarians, and breeders. It operates quietly and without vibrations, does not heat up, and can work continuously. The ergonomic and lightweight casing fits well in the hand, while the switch with a lock prevents accidental shut-off, making it easy to use. The clipper is completely maintenance-free - it does not require lubrication of internal moving parts. Available in four color variants. Equipped with Constant Speed technology, which means the clipper will not slow down when cutting through matted and tangled fur. It has two speeds (3000 and 3800 strokes per minute), with the first speed suitable for most grooming tasks, and the second with increased RPM used for working with difficult and demanding fur. The clipper blade can be attached in seconds, using the Snap-on (also known as Clip-On) system - the most popular blade attachment system on the market. Included is the latest generation Andis CeramicEdge blade No. 10 with a ceramic cutting insert, cutting length of 1.5 mm. Additional ceramic blade Andis CeramicEdge No. 7FC - 3.2 mm FREE! Interesting fact: Carbon brushes used in traditional motors wear out after about 600-800 hours of operation. Brushless motors can operate for up to 8000 hours (10 times longer) than traditional brushed motors. They are also lighter, more environmentally friendly (do not emit carbon dust), and safer - powered by low voltage 24V, eliminating high voltage from the power cord and clipper. The clipper is compatible with Snap-On blades from: Andis, Oster, Moser, Wahl, Aesculap, Heiniger, Geib, Thrive. Included in the set: Andis AGCB Super Brushless clipper, CeramicEdge blade No. 10 cutting at 1.5mm, tube of blade oil, spare drive (transfers power from the motor to the blade), user manual in Polish, 12-month warranty card, plus - Andis CeramicEdge blade No. 7FC - 3.2 mm.
€241,90
Moser PCB electronics with battery for Moser / Wahl Super clippers
Electronics PCB with battery for Moser / Wahl clippers. Battery capacity: 1800mAh. Part intended for the following clipper models: Wahl Super Trim. GroomerShop.pl is an authorized warranty and post-warranty service for pet clippers. All offered parts are original service parts from the manufacturer. If you need a part that is currently not available in our store, please contact us, and we will verify the possibility of ordering it.
€40,32
Heiniger Heiniger Opal 2 - Speed Brushless Clipper - professional, two-speed cordless clipper with blade (1.5mm) and carrying case - batteries included
Opal is the latest model of the cordless clipper from the Heiniger brand. Now even more durable and quieter, thanks to the use of a brushless motor. Two speeds allow you to adjust the speed to every type of coat and type of work. The ergonomic and slim design fits perfectly in the hand and provides maximum comfort during use. The lithium-ion battery with a built-in battery level indicator allows for continuous operation for 4 hours! (The battery has no memory effect, so we can recharge it at any time.) Noticeably quieter than other clippers of this type, the Opal enhances the comfort of work for every user and reduces stress for animals. It can handle every type of coat: both thick, woolly undercoats and fine hair. It is compatible with all Snap-On blades available on the market. Comes with a case along with blade number 10 (1.5 mm) and accessories. Recommended for pet grooming salons, veterinary clinics, and breeding. Technical specifications of Heiniger Opal: weight of the clipper with blade and battery: 415g, weight of the battery: 127g, speed: 2600/3100 strokes/min, working time: up to 4h, charging time: 60min, noise level:
€516,58
Heiniger Heiniger Clipper Brush - convenient brush for cleaning clippers and blades
Heiniger Clipper Brush is a convenient brush with a plastic handle for cleaning blades and clippers. It features long nylon bristles that allow for precise cleaning of hair, fur, and dirt. Total length is 17cm.
€3,78
Aesculap Aesculap Durati VET - professional, cordless veterinary clipper with blade #40 (0.25mm), blue
Durati Vet is a new, wireless pet grooming clipper model from Aesculap, designed for veterinarians. It is an extremely solid and reliable tool, created for professionals. The clipper is lightweight, ergonomic, and highly efficient, featuring excellent battery life. The new generation of lithium-ion batteries designed for Durati is also compatible with Favorita CL and Fav5 CL, and works with their charging stations. Advantages of the Aesculap Durati Vet clipper: - Efficient lithium-ion battery technology provides a very long operating time (over 3 hours) - High cutting speed due to high RPM: 3500 strokes per minute - Extremely powerful cutting ability, even with thick and dirty fur - Ergonomic design - Lightweight construction does not tire the hand - Charging station with charging compartments for the clipper and battery included - Comes with GT310 #40 blade (0.25 mm) Technical specifications: - Battery: lithium-ion; 2850mAh - Speed: approx. 3500 strokes/min - Operating time: approx. 240 min - Charging time: approx. 240 min - Noise level: 63dB - Weight: 380g (with blade and battery) - Number of speeds: 1 Included in the package: - Aesculap Durati Vet wireless clipper - Lithium-ion battery (XT431) - GT310 #40 blade (0.25 mm) - 90ml oil - Charging station (XT433) with power supply - 3x power adapter - Instruction manual
€400,66
Oster Air filter for Oster Golden A5 clipper
Replaceable air filter for Oster Golden A5 clippers, graphite. GroomerShop.pl is an authorized warranty and post-warranty service for pet clippers. All offered parts are original service parts from the manufacturer. If you need a part that is currently not available in our store, please contact us, and we will verify the possibility of ordering it.
€2,52
Oster Oster A6 Comfort Vet - professional three-speed clipper set for veterinarians
Oster USA A6 Comfort - this is a very sturdy three-speed clipper. Fully professional, recommended for veterinarians, groomers, and breeders alike. It operates smoothly and without vibrations, allowing for practically continuous use. A special latch stabilizes the blades, preventing them from wobbling during operation. The clipper features a simple and easy-to-use one-button blade replacement system. Technical specifications: 3 speeds (3100/3600/4100 revolutions per minute) High-performance motor, very quiet, does not overheat Innovative drive transmission system Ergonomic shape A specially designed vibration dampener absorbs vibrations and noise, minimizing hand fatigue Compatible with A5 blades Cord length: 3.66 m Included: Oster A6 Comfort clipper, tube of lubricant for the blades, cleaning brush, instruction manual in Polish Oster Golden A6 is compatible with blades from the following brands: Andis, Oster, Moser, Geib, Aesculap, Wahl, Thrive The clipper is sold without a blade by default! When purchasing the Oster A6 Comfort clipper, you additionally receive a blade dedicated for veterinarians: Oster #50 cutting at 0.2mm.
€251,98
Aesculap Bearing for Aesculap Favorita II Clipper (GT104)
Are you looking for spare/service parts for the Aesculap Favorita II clipper (GT104)? Make your selection based on the service diagram of the clipper. Tip: Available parts are visible after expanding the list above the Add to Cart button. GroomerShop.pl is an authorized warranty and post-warranty service for Aesculap clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown on the diagram, please contact us, and we will verify the possibility of ordering it. Product Code | Name 1 | GT104850 | PCB board for Aesculap Favorita II clipper (GT104) 2 | SRV-AE-TA004663 | Electronics board screw for Aesculap Favorita II clipper (GT104) 3 | SRV-AE-GT104614 | Carbon brush for Aesculap Favorita II clipper (GT104) 4 | SRV-AE-GT104319 | Rear bearing cover for Aesculap Favorita II clipper (GT104) 5a | SRV-AE-TA004631 | Bearing 16x5mm for Aesculap Favorita II clipper (GT104) 6 | GT104865 | Rotor for Aesculap Favorita II clipper (GT104) 6a | SRV-AE-TA003544 | Rotor bearing 19x6 for Aesculap Favorita II clipper (GT104) 7 | SRV-AE-GT104320 | Front bearing cover for Aesculap Favorita II clipper (GT104) 8 | SRV-AE-TA013499 | M3x16 housing screw for Aesculap Favorita II clipper (GT104) 9 | GT104801 | Lower extension for Aesculap Favorita II clipper (GT104) 10 | SRV-AE-TA004691 | Original switch/key switch for Aesculap Favorita II clipper (GT104) - single speed 11 | SRV-AE-GT104249 | Rubber switch cover for Aesculap Favorita II clipper (GT104) 12 | SRV-AE-GT300224 | Felt oil seal for Aesculap Favorita II clipper (GT104) 13 | GT104217 | Lever spring for Aesculap Favorita II clipper (GT104) 14 | SRV-AE-GT104316 | Lever clamp for Aesculap Favorita II clipper (GT104) 15 | SRV-AE-TA004639 | Blade guide screw for Aesculap Favorita II clipper (GT104) 16 | GT104415 | Blade bed for Aesculap Favorita II clippers (GT104) 17 | SRV-AE-GT104225 | Felt washer for Aesculap Favorita II clipper (GT104) 18 | SRV-AE-GT104808 | Lever for Aesculap Favorita II clipper (GT104) 19 | SRV-AE-TA003820 | Locking ring for lever for Aesculap Favorita II clipper (GT104) 20 | SRV-AE-TA004637 | Gear wheel washer for Aesculap Favorita II clipper (GT104) 21 | SRV-AE-GT104840 | Gear wheel for Aesculap Favorita II clipper (GT104) 22 | SRV-AE-GT104244 | Lever bushing for Aesculap Favorita II clipper (GT104) 23 | GT104213 | Wire clamp for Aesculap Favorita II clipper (GT104) 24 | TA003537 | Wire clamp screw for Aesculap Favorita II clipper (GT104) 25 | SRV-AE-GT104227 | Pendant/holder for Aesculap Favorita II clippers (GT104) 26 | SRV-AE-TA013520 | Original, replaceable power cord for Aesculap Favorita II clippers (GT104) 27 | SRV-AE-GT105326 | Wire cover for Aesculap Favorita II clipper (GT104)
€7,56
Heiniger Heiniger Delta - powerful, professional clipper for horses and cattle, 180W, variable speeds
The powerful professional Heiniger Delta 3 clipper is designed for grooming horses and cattle. This model allows for quick and easy clipping even in very challenging conditions. The long power cord enables grooming at a considerable distance from the power source. The motor is highly durable. It features 3 speed settings: the first speed is up to 2100 RPM, the second speed is 2800 RPM, and the third speed is 3200 RPM. The package includes: Heiniger Delta 3 clipper, case, blade 21/23 (2-4mm), screwdriver, oil, and cleaning brush.
€478,78
Heiniger Heiniger Blade/Clipper Screwdriver for Horses
Original screwdriver designed for adjusting/replacing blades in Heiniger brand clippers. An essential tool for the daily use of horse/cattle grooming clippers. Features of the Heiniger screwdriver: sturdy, octagonal handle, 2 flat tips with widths of 7mm and 10mm.
€12,60
Andis Andis Replacement Power Cord - power cord for Andis eMERGE clipper + set of power adapters
Power supply for Andis eMERGE (RDLC) clippers with cable and a set of adapters. Designed for versatile use with various plug types to ensure compatibility in different regions. The set includes five different plug configurations, allowing for seamless connection to electrical outlets worldwide. Made from high-quality components, it is designed for hassle-free use, longevity, and the safety of the user and connected electronic devices. The set consisting of 5 adapters is a great travel accessory, enabling the use of electrical devices that are not adapted to international outlet standards. The 5 different plug types allow the user to connect their clipper regardless of location. A practical clip allows for easy adapter changes without the need for force. The adapters offer compatibility in countries using European, American, Australian, and British socket systems! Sample countries include: Argentina, Australia, Belgium, China, Cyprus, Czech Republic, Denmark, France, Hong Kong, Ireland, Japan, Canada, Kenya, Korea, Malaysia, Mexico, Morocco, Nigeria, New Zealand, Poland, Singapore, Slovakia, Thailand, Tunisia, Vietnam, United Kingdom, United Arab Emirates. The device does not change voltage. The voltage of the connected device must match the voltage of the local electrical network. For indoor use only. Product features: made from high-quality components, 5 different power adapters, 3.5m cable. Technical specifications: Power supply model: SPL135220 Input voltage: 100-240V ~ 50-60Hz 0.8A Output voltage: 13.5V 2200mA Ingress protection class: IP20 - for indoor use only Color: black Power adapters: Type G - UK standard Type I - AU standard Type C - EU standard Type N - BZ standard Type I - AR standard
€50,38
Andis Muzzle for Andis AGC, AGC2, AGC2 Super Speed Clippers
Muzzle for Andis AGC, AGC2, AGC2 Super Speed clippers.
€30,24
Aesculap Aesculap FAV5 CL - professional cordless clipper with blade
Aesculap FAV5 CL is a cordless clipper - a variant of the FAV5 model. Designed for professional use. Reliable, sturdy, and precise. The clipper is motorized, single-speed, and very durable. It operates quietly and without vibrations. The clipper is compatible with Snap-On blades from various manufacturers: Andis, Oster, Moser, Wahl, Thrive, Kim Laube, Aesculap, Geib, and others with this type of attachment. Included: FAV5 CL clipper, blade #10 - 1.5mm, charging station, 1x lithium-ion battery, Aesculap oil. Specifications: speed 2300 strokes per minute, lithium-ion battery with no memory effect, battery runtime 240 minutes (battery charging time 240 minutes).
€453,58
Artero Artero Clic Trimmer - finishing trimmer with chrome blade, black
Incredibly ergonomic finishing clipper from the Artero brand, designed for precise trimming and detail work. The built-in lithium-ion battery allows for 60 minutes of operation, and there is also the option to work with a cord (included) after the battery is depleted. This trimmer is perfect for use in grooming salons, during exhibitions and shows, as well as in home settings. The LED indicator informs us about the battery charge level. The included carbon-chromed blade cuts at a length of 0.3 mm. The set also includes double-sided guide combs in lengths: 3/4 mm and 5/6 mm. The Artero Clic model is very lightweight and handy, fits perfectly in the hand, and does not strain the wrist. Available in 3 colors. Technical specifications of the Artero Clic Trimmer: speed: 2700/min weight: 114g power: 7W operating time: up to 60min battery type: lithium-ion type of clipper: corded/cordless cutting length: 0.3mm Included in the set: Artero Clic clipper carbon-chromed blade two double-sided guide combs: 3/4mm and 5/6mm power cable oil brush
€75,58
Heiniger Heiniger Clamping Arm for Clippers
Are you looking for spare/service parts for the Heiniger Xplorer clipper? Make your selection based on the service diagram of the clipper. GroomerShop.pl is an authorized warranty and post-warranty service for Heiniger clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown on the diagram, please contact us, and we will verify the possibility of ordering it. Product Code | Name 1 | SRV-HG-708-540 | Blade head for Heiniger Xplorer 2 | SRV-HG-708-160 | Adjustment knob cover for Heiniger Xplorer 3 | SRV-HG-706-510 | Spacer screw for Heiniger Xplorer 4 | SRV-HG-707-091 | Blade pressure sleeve for Heiniger Xplorer 5 | SRV-HG-706-520 | Screw for Heiniger Xplorer clippers M5 x 14 6 | SRV-HG-708-141 | Head housing for Heiniger Xplorer 7 | SRV-HG-706-517 | Pressure spring for Heiniger Xplorer clippers 8 | SRV-HG-706-511 | Pressure arm for Heiniger Xplorer 9 | SRV-HG-708-507 | Blade drive block for Heiniger Xplorer 10 | SRV-HG-706-525 | Guide screw M3 X 6 for Heiniger Xperience 11 | SRV-HG-706-518 | Blade leaf springs for Heiniger Xplorer 12 | SRV-HG-708-150 | Yoke guide for Heiniger Xplorer 13 | SRV-HG-706-521 | Blade mounting screw for Heiniger Xplorer 14 | HG-708-146 | Yoke sleeve for Heiniger Xperience/Xplorer 15 | SRV-HG-707-088 | Ring/seger size 3.73mm for Heiniger Xplorer 16 | SRV-HG-706-524 | Seger ring size 6 for Heiniger Xplorer clippers 17 | SRV-HG-708-145 | Crankshaft for Heiniger Xplorer clippers 18 | SRV-HG-708-142 | Crank sleeve for Heiniger Xplorer 19 | SRV-HG-708-543 | Gear for Heiniger Xplorer, 27 teeth 27 | SRV-HG-707-882 | Rubber feet for Heiniger Xplorer charger 30 | SRV-HG-708-430 | Upper housing for Heiniger Xplorer 31 | SRV-HG-708-061 | Switch slider for Heiniger Xplorer 32 | SRV-HG-708-461 | Switch lock for Heiniger Xplorer 33 | SRV-HG-708-450 | Lower housing for Heiniger Xplorer 34 | SRV-HG-708-510 | Front motor handle for Heiniger Xplorer 35 | SRV-HG-708-511 | Rear motor handle for Heiniger Xplorer 36 | HG-708-520 | Battery for Heiniger Xplorer 37 | SRV-HG-708-480 | Electronics/PCB for Heiniger Xplorer 39 | SRV-HG-701-711 | Screw for Heiniger Xplorer clippers M2.6 x 6 40 | SRV-HG-708-440 | Housing with switch for Heiniger Xplorer 41 | SRV-HG-707-555 | Pendant for Heiniger Xplorer 45 | HG-708-500 | Motor for Heiniger Xplorer 50 | SRV-HG-708-550 | Charging station for Heiniger Xplorer 51 | SRV-HG-708-570 | Charger housing for Heiniger Xplorer 52 | HG-707-557 | Large housing screw (KA 3x16) for Heiniger clippers 53 | SRV-HG-708-563 | Charger base for Heiniger Xplorer 54 | SRV-HG-708-564 | LED lighting for Heiniger Xplorer charger 55 | SRV-HG-708-560 | Charger electronics for Heiniger Xplorer 60 | SRV-HG-708-590/EU | Charger power supply for Heiniger Xplorer
€5,04
Aesculap Aesculap Econom NOVA - professional and powerful sheep shearing clipper with blade
Aesculap Econom Nova is a high-quality, professional sheep shearing machine. Very powerful (200W), designed for heavy and efficient work. Built very solidly, it can operate for long periods without the risk of overheating. The ergonomic handle ensures high comfort during use, and the model is very easy to operate. The cutting blades are made from high-quality carbon steel, resistant to wear. The newly designed shaving head for the specially developed short shaving blade GT598 is also compatible with blades from most other manufacturers. Included with the cutting blade at 3.5mm, a case, and other accessories. Specifications of the Aesculap Econom NOVA shearing machine: - Ideal for sheep shearing - High cutting speed (2750 rpm) - High-power motor (200W) - Lightweight, ergonomic housing - Strong and durable EC motor (brushless) - Easy filter replacement - Designed for professionals Included in the package: - Aesculap Econom NOVA shearing machine (GT694) - Cutting blade at 3.5mm - Lower blade with 13 teeth (GT598) - Upper blade with 4 teeth (GT578) - Plastic storage case - Screwdriver - 90ml tube of oil - Warranty card - Instruction manual Technical data: - Motor speed: max. 2750 rpm - Motor power: 200W - Noise level:
€503,98
Wahl Wahl Bravura Clipper Battery 2250mAh/3.6V
Original battery for the Wahl Bravura clipper with a capacity of 2250mAh. GroomerShop.pl is an authorized warranty and post-warranty service for pet grooming clippers. All offered parts are original service parts from the manufacturer. If you need a part that is currently not available in our store, please contact us, and we will verify the possibility of ordering it.
€25,18
Oster Spare parts for Oster Golden A5 clippers - LED
LED for Oster Golden A5 clippers. GroomerShop.pl is an authorized warranty and post-warranty service for pet clippers. All offered parts are original service parts from the manufacturer. If you need a part that is currently not available in our store, please contact us, and we will verify the possibility of ordering it.
€0,76
Oster Oster A6 Slim 3-Speed Clipper Paw Print - professional three-speed pet grooming clipper in colorful paw design - With a blade (0.2mm)
Oster A6 Slim is a very solid three-speed clipper. Fully professional, recommended for veterinarians, groomers, and breeders alike. It operates smoothly and without vibrations, allowing for continuous use. A special latch stabilizes the blades, preventing them from wobbling during operation. The clipper features a simple and easy one-button blade exchange system. Now available in a new version with three color options to choose from! Technical specifications: 3 speeds (3100/3600/4100 RPM), high-performance motor, very quiet, does not overheat, innovative drive system, lightweight with an ergonomic slim shape, specially designed vibration dampener absorbs vibrations and noise, minimizing hand fatigue, compatible with A5 blades, cord length: 3.66 m, weight: 367 grams. Included: Oster A6 Slim clipper with a colorful paw print casing, choice of blade number 10 or 50 (for an additional fee), tube of lubricant for maintenance, cleaning brush, instruction manual in Polish. Oster Golden A6 is compatible with blades from: Andis, Oster, Moser, Geib, Aesculap, Wahl, Thrive.
€264,58
Heiniger Bearing pad for Heiniger clippers
Are you looking for spare/service parts for the Heiniger Xperience clipper? Make your selection based on the service diagram of the clipper. GroomerShop.pl is an authorized warranty and post-warranty service for Heiniger clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not shown in the diagram, please contact us, and we will verify the possibility of ordering it. Product Code | Name 1 SRV-HG-708-140 | Blade head for Heiniger Xperience clipper 2 SRV-HG-708-160 | Adjustment knob cover for Heiniger Xperience 3 SRV-HG-706-510 | Spacer screw for Heiniger Xperience clipper 4 SRV-HG-707-091 | Blade pressure sleeve for Heiniger Xperience 5 SRV-HG-706-520 | Screw for Heiniger Xperience clippers M5 x 14 6 SRV-HG-708-141 | Head housing for Heiniger Xperience clipper 7 SRV-HG-706-517 | Pressure spring for Heiniger Xperience clippers 8 SRV-HG-706-511 | Pressure arm for Heiniger Xperience 9 HG-706-507 | Yoke block for Heiniger Xperience clippers 10 SRV-HG-706-525 | Guide screw M3 X 6 for Heiniger Xperience 11 HG-706-518 | Arm/plate yoke for Heiniger Xperience clippers 12 SRV-HG-708-150 | Yoke guide for Heiniger Xperience clipper 13 SRV-HG-706-521 | Blade mounting screw for Heiniger Xperience 14 HG-708-146 | Yoke sleeve for Heiniger Xperience/Xplorer 15 SRV-HG-707-088 | Ring/seger size 3.73mm for Heiniger Xperience 16 SRV-HG-706-524 | Seger ring size 6 for Heiniger Xperience clippers 17 SRV-HG-708-145 | Crankshaft for Heiniger Xperience clippers 18 SRV-HG-708-142 | Crank sleeve for Heiniger Xperience clipper 19 SRV-HG-708-143 | Gear Z22 for Heiniger Xperience clippers 30 SRV-HG-708-070 | Air filter for Heiniger Xperience clippers 31 SRV-HG-708-061 | Switch slider for Heiniger Xperience 32 SRV-HG-708-030 | Upper housing for Heiniger Xperience clipper 33 SRV-HG-708-060 | Switch lock for Heiniger Xperience 34 SRV-HG-708-102 | Motor for Heiniger Xperience clippers 35 SRV-HG-708-110 | Motor front for Heiniger Xperience clipper 36 SRV-HG-708-138 | Motor stator for Heiniger Xperience clipper 37 SRV-HG-708-120 | Ball bearing 8-19-6 for Heiniger clippers 38 SRV-HG-708-122 | Washer for ball bearing for Heiniger clippers 39 SRV-HG-708-132 | Rotor for Heiniger Xperience clipper 40 SRV-HG-701-637 | Pressure ring for Heiniger Xperience clippers 41 SRV-HG-708-111 | Brush holder for Heiniger Xperience clipper 42 SRV-HG-708-124 | Carbon brush spring for Heiniger Xperience clipper 43 SRV-HG-706-523 | Mounting screw M4 X 10 for Heiniger Xperience clipper 44 SRV-HG-708-123 | Fan wheel for Heiniger Xperience clipper 45 HG-708-118 | Carbon brush for Heiniger Xperience clipper 46 SRV-HG-708-115 | Motor clamp/mount for Heiniger Xperience 47 SRV-HG-708-050 | Lower housing for Heiniger Xperience clipper 48 SRV-HG-707-082 | Cable mounting for Heiniger Xperience clipper 49 SRV-HG-707-080 | Cable bend for Heiniger Xperience clippers 50 SRV-HG-708-082 | PCB electronics for Heiniger Xperience clipper 51 SRV-HG-708-125 | Connecting wire for Heiniger Xperience 52 HG-707-557 | Large housing screw (KA 3x16) for Heiniger Xperience clipper 53 SRV-HG-707-055 | Power cable for Heiniger Xperience clippers
€1,26
Andis Andis - sponge pad for AGC, AGC2, AGC2 Super Speed clippers
Sponge pad for Andis AGC, AGC2, AGC2 Super Speed clippers.
€3,78
Oster Rotor resistance spring for Oster Golden A5
Are you looking for spare/service parts for the Oster Golden A5 clipper? Make your selection based on the service diagram of the clipper. GroomerShop.pl is an authorized warranty and post-warranty service for Oster clippers designed for animals. All offered parts are original service parts from the manufacturer. If you need a part that cannot be selected and/or is not presented in the diagram, please contact us, and we will verify the possibility of ordering it. Product Code | Name 1 | SRV-O-41664-000 | Blade cover/hinge screw for Oster A5 2 | SRV-O-115286-020 | Front cover for Oster Golden A5 3 | SRV-O-41676-000 | Oiler for Oster Golden A5 4 | SRV-O-42563-000 | Oil wick for Oster Golden A5 6 | O-44946-005-000 | Rocker for Oster Golden A5 7 | O-45515-000 | O-link for Oster Golden A5 8 | SRV-O-41723-000 | Felt grease seal for Oster Golden A5 9 | SRV-O-111012-020 | Brush cover for Oster Golden A5, brown 9 | SRV-O-111012-010 | Brush cover for Oster Golden A5, black 10 | O-42584-025 | Carbon brushes for Oster Golden A5, set of 2 11 | SRV-O-42566-005 | Stop plate for Oster Golden A5 12 | O-105520-000 | Cam (gear) for Oster Golden A5 13 | O-57022-005 | Main housing brown for Oster Golden A5 13 | O-57022-010 | Main housing black for Oster Golden A5 14 | O-58543-000 | Spacer under the cam for Oster Golden A5 15 | O-44941-000-000 | Blade hinge for Oster Golden A5, Oster A6 16 | SRV-O-41665-000 | Hinge/cover screw for Oster Golden A5 17 | O-45588-000 | Blade guard for Oster Golden A5 20 | O-42571-000 | Blade pressure bar for Oster 21 | SRV-O-45501 | Blade pressure spring for Oster Golden A5 22 | O-44936-000 | Blade hook for Oster Golden A5 23 | SRV-O-115544-000 | Cover plate for Oster Golden A5 25 | O-42555-000 | Blade screw for Oster A5 26 | SRV-O-57070-000 | Bushing for Oster Golden A5 27 | SRV-O-42568 | Felt washer for Oster Golden A5 29 | SRV-O-58519-000 | Bearing seal for Oster Golden A5 31 | SRV-O-42114-050 | Fastening screw for the seal for Oster Golden A5 32 | O-84906-005 | Rotor for Oster Golden A5 single speed 32 | O-84906-000 | Rotor for Oster Golden A5 double speed 33 | SRV-O-84936-000 | Stator for Oster Golden A5 34 | O-44938-000-000 | Blade latch for Oster Golden A5, A6 35 | SRV-O-42557-000 | Sealing ring for Oster Golden A5 36 | SRV-O-42559 | Spring plug for Oster Golden A5 37 | SRV-O-42562-000 | Rotor spring for Oster Golden A5 38 | SRV-O-58006-000 | Brush holder for Oster Golden A5 42 | SRV-O-42570-000 | Sealing ring for the housing of Oster Golden A5 43 | SRV-O-53825-091 | Capacitor 0.1uF for Oster Golden A5 44 | O-58357-009 | Switch for Oster Golden A5 single speed 44 | O-SWITCH2 | Switch for Oster Golden A5 double speed 46 | O-84177-115 | End housing brown for Oster Golden A5 46 | O-84177-125 | End housing black for Oster Golden A5 47 | SRV-O-41756-000 | Spring washer for Oster Golden A5 48 | SRV-O-42113-015 | Terminal clamp screw for Oster Golden A5 49 | SRV-O-41683 | Switch nut for Oster A5 50 | SRV-O-42614-000 | Brush cap for Oster Golden A5 51 | SRV-O-42573-000 | Clip for Oster Golden A5 52 | SRV-O-42551 | Housing clamp for Golden A5 55 | O-165265-000 | Power cord for Oster Golden A5 62 | SRV-O-42564-000 | Screw for securing the stator wires to Oster Golden A5 79 | SRV-O-58355-000 | Terminal holder for Oster Golden A5 80 | SRV-O-111013-070 | Air filter for Oster Golden A5, graphite
€0,76
You have seen 72 out of 556 products
